Spoiler Trim, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Replace any fasteners that are damaged.
-- Connect the connector -3- for the High-Mounted Brake Lamp Bulb -M25- -4-.
-- Position the spoiler trim -2- on the spoiler trim support -5- and align it.
-- Slide the clips -1- into the openings for the spoiler trim support -5-.
-- Push on the Velcro -6- in the area of the High-Mounted Brake Lamp Bulb -M25- -4-.
-- Position the spoiler trim -2- on the spoiler trim support -5- and press it on.