Roof Trim Molding, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Requirement
- If the clip -4- on the roof trim molding -1- is damaged, the roof trim molding -1- must be replaced.
-- Guide the roof trim molding -1- behind the fender -5-.
-- Align the roof trim molding -1- on the roof pillar -3-.
-- Attach the roof trim molding -1- with the clip -4- in the -direction of the arrow A-.
-- Press on the roof trim molding -1- starting from the -arrow A- to -arrow C- on the clips -2- until it clicks into place.
Further installation is performed in reverse order of the removal.