Rear Emblem, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Center Tail Lamp -MX13-. Refer to Center Tail Lamp -MX13-, REMOVING AND INSTALLING .
-- Heat up the emblem using the Hot Air Blower: V. A. G 1416 . Refer to Installation Requirements for Components with Adhesive Tape .
-- Position the commercially available plastic wedge -3- between the emblem on the rear -1- and the Center Tail Lamp -MX13- -2-.
-- Pry out the emblem on the rear -1- in the -direction of the arrow-.