Front Door Cover, Removing And Installing: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
-- Heat up the front door cover -3- in the area of the adhesive surfaces, using the Hot Air Blower: V. A. G 1416 . Refer to Installation Requirements for Components with Adhesive Tape .
-- Pry the front door cover -3- out of the door -2- in the -direction of the arrow- using a commercially available wedge -1-.