Front Door Cover, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Remove the adhesive residue and the adhesive surfaces. Refer to Installation Requirements for Components with Adhesive Tape .
-- Remove the protective film by pulling on the adhesive tape -2- and -3-.
-- Engage the front door cover -1- on the bottom of the door -5- and align with the centering pin -4-.
-- Push in the front door cover -1- until it clicks into place.
-- Press on the front door cover -1- in the area of the adhesive surfaces using the Roller: T40400 .
Requirement
- The minimum curing time must be complied to. Refer to Installation Requirements for Components with Adhesive Tape .