Tread Depth, Measuring

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

When measuring tread depth, take measurements in the main grooves.

Do not take measurements at the tread wear indicator.

Tread depth of a tire must be measured in the main grooves at the points showing the most wear. The positions of the tread wear indicators are marked along the tire shoulder -Item : Position of Tread Wear Indicators (TWI).

Fig 1: Locating Tread Wear Indicator

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

In place of "TWI", there may also be a "Δ" or "company emblem".

The TWI protrusions are 1.6 mm tall. This is the minimum tread depth legally prescribed in Germany.

Different values may apply in other countries.

Tread Wear Indicators (TWI) must not be included in the measurement. The deepest point of the groove must be used for the measurement.

Fig 2: Identifying Tread Wear Indicators

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

A -

Tread Wear Indicators in Main Tread Grooves

B -

Main Grooves with Tread Wear Indicators -arrows-