Valve, Removing And Installing, Rubber Valve

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Make sure wheel rim is clean.

-- Using the Valve Fitting Tool: VAS 6459 -1-, insert a new tire valve.

Fig 1: Identifying VAS -6459- To Install New Tire Valve

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the valve insert.

-- Inflate the tire to approximately 3 to 4 bar (43.51 to 58.02 psi); the tire bead must slip audibly over the rim hump when doing this.

-- Install the valve insert.

-- Check the tire pressure for specified pressure.

-- Balance the tire.