LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Wheels, Tires, Wheel Alignment Wheel And Tire Guide General Information) >> 44 Wheels, Tires, Wheel Alignment >> Disc Wheel (Rim), Information >> Valve, Removing And Installing >> Valve, Removing And Installing, Metal Valve >> Removing

Valve, Removing And Installing, Metal Valve: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the Tire Pressure Monitoring Sensor --. Refer to TIRE PRESSURE MONITORING SENSOR, REMOVING AND INSTALLING, WITHOUT VALVE, VERSION 1, SERVICE VERSION .

-- Remove the nut -1- from the metal valve.

Fig 1: Identifying Metal Valve
GWWN44-10443Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Counterhold -arrow- the metal valve using a retainer (for example 2 mm spiral bore) while doing so.

scientia non olet · About LEMON Manuals