Hub Cap For Alloy Wheels With Open Threaded Connection, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

-- Hold the cap -1- flush against the opening in the aluminum rim.

Fig 1: Hold Cap Flush Against The Opening In The Aluminum Rim

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Line up the Volkswagen logo on the cap with the valve so that the logo is centered over the valve -2-.

-- Press on the cap so that it is secure inside the opening in the aluminum rim.

-- Make sure the cap is secure inside the aluminum rim.