Driveshaft, Removing And Installing: Installing

Install in the reverse order of removal while noting the following:

-- Install all parts marked to each other in their original positions.

-- Install the bolts -1- for the intermediate bearing but do not tighten them.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts for the driveshaft flexible disc -2- on the bevel box and rear final drive to the tightening specification.

-- Align the intermediate bearing in the oblong holes so that neither the driveshaft nor the intermediate bearing are under stress.

-- Tighten the bolts -1- to the tightening specification.

Install in the reverse order of removal while noting the following:

-- Install all parts marked to each other in their original positions.

-- Position the bolts -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the bolts for attaching the driveshaft flexible disc to the bevel box and to the rear final drive.

-- Align the intermediate bearing -2- in the oblong holes so that neither the driveshaft nor the intermediate bearing are under stress.

-- Tighten the bolts -1- to the tightening specification.