Suction Jet Pump, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the rear bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .
-- Drain the fuel tank. Refer to FUEL TANK, DRAINING .
CAUTION:
The fuel system is under pressure.
Risk of injury from fuel spraying out.
- Wear protective eyewear.
- Wear safety gloves.
- Reduce the pressure: place clean cloths around the connection point and carefully open the connection point.
-- Remove the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .
-- Remove the Fuel Level Sensor 2 -G169-. Refer to SENSORS .
-- Remove the suction jet pump though the opening for the Fuel Level Sensor 2 - G169- on the fuel tank.
NOTE:
Follow all waste disposal regulations.
Check the fuel tank for contamination.