Fuel Pump Control Module -J538-, REMOVING AND INSTALLING, PASSAT AND ARTEON: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal.
-- Connect the wiring harness to the Fuel Pump Control Module -J538-.
-- Pull on the connector to make sure it is secure.
-- Insert the Fuel Pump Control Module -J538- into the mount on the fuel tank and press on it until it clicks into place.
-- Pull on the Fuel Pump Control Module -J538- to make sure it is secure.