Overview - Driveshaft, Cc From 2012, PASSAT, PASSAT Wagon, Golf, Golf Wagon, TIGUAN, ARTEON
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Do not perform any repair work on the driveshaft.
- Transmission with Bevel Box
- Bolt
- Allocation. Refer to the appropriate Electronic Parts Information.
- For flexible disk to driveshaft
- Always replace after removing.
- 50 Nm and 90° additional turn.
- Front Flexible Disc
- Allocation. Refer to the appropriate Electronic Parts Information.
- Bolt
- Allocation. Refer to the appropriate Electronic Parts Information.
- For flexible disk to bevel box.
- Always replace after removing.
- 50 Nm and 90° additional turn.
- Driveshaft
- It cannot be separated at the joint -arrow-.
- Allocation. Refer to the appropriate Electronic Parts Information.
- Removing and installing. Refer to DRIVESHAFT, REMOVING AND INSTALLING .
- Bolt
- Allocation. Refer to the appropriate Electronic Parts Information.
- 25 Nm
- Intermediate Bearing
- Align it so that it is free of tension.
- Bolt
- Allocation. Refer to the appropriate Electronic Parts Information.
- For flexible disk to driveshaft
- Always replace after removing.
- 50 Nm and 90° additional turn.
- Bolt
- Allocation. Refer to the appropriate Electronic Parts Information.
- For attaching the flexible disk to the final drive
- Always replace after removing.
- 50 Nm and 90° additional turn.
- Flexible Disc with Vibration Damper
- Allocation. Refer to the appropriate Electronic Parts Information.
- Rear Final Drive
- Removing and Installing. Refer to FINAL DRIVE, REMOVING AND INSTALLING .