All-Wheel Drive Clutch Pump -V181-, REMOVING AND INSTALLING, GENERATION IV: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Switch the ignition off.

-- Drain the all-wheel drive clutch oil. Refer to ALL-WHEEL DRIVE CLUTCH OIL, DRAINING AND FILLING .

-- Remove the pump connector -arrow- from the control module.

Fig 1: Clipping Wiring Harness To Haldex Clutch Securely And Placing Connector On Control Module

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the wiring harness from the housing.

-- Place the drip tray under the final drive.

-- Remove the pump bolts -1-.

Fig 2: Haldex Clutch Pump V181

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the pump -arrow- from the all-wheel drive clutch housing.