Add Oil If The Oil Level Is Not Correct

-- Remove the filler plug -2- (shown with final drive removed to provide a better illustration).

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Install the Charging Device for AWD Clutch Coupling 2 - Adapter 1-2:VAS 6291/1-2  -A- all the way.

Fig 1: Connecting Adapter & Elbow

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Lock the elbow -B- using the adapter -A-.

-- Add enough oil using the Oil Filler:VAS 6262A  until it runs out between the charging device adapter and the transmission housing.

-- Remove the charging device and adapter if necessary a little oil left over will flow out.

The oil level is correct when the all-wheel drive clutch is filled up to the lower edge of the oil fill hole.

-- Install the bolt -2- and tighten.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Check the all-wheel drive clutch fluid level. Refer to OIL LEVEL, CHECKING .

Tightening specifications:

• Refer to COMPONENT LOCATION OVERVIEW - DRAIN AND CHECK PLUGS