LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 177 (Rear Doors) >> 58 Rear Doors >> Door Components >> Inner Window Shaft Strip, Removing And Installing >> Installing

Inner Window Shaft Strip, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the protective film from the adhesive tape -2-.

-- Align the inner window shaft strip -1- and push in evenly by hand on the door flange -b arrows-.

-- Make sure that the window shaft strip sits correctly over the seal -4- -c arrows-.

-- Press the clips on -3- and press firmly on the strip in the adhesive tape area -2-.