LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Rear Lid Seal, Removing And Installing >> Assembly Instructions >> Installing

Assembly Instructions: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Follow the assembly instructions. Refer to Assembly Instructions .

-- Clean the adhesive surfaces with adhesive remover and a cleaning cloth and allow it to dry for 10 minutes.

-- Align the seal -1- and remove the protective film from the adhesive tape -3-.

-- Use pressure to apply the seal with the Roller:3356  .

scientia non olet · About LEMON Manuals