Rear Lid Drive Unit VX69 /Rear Lid Drive Unit 2 VX77 Preparing For Disposal
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Cut all around the protective cover -2- using a commercially available window cutter -arrow A- and -arrow B-.
-- Remove the protective cover -2- in the -direction of the arrow C-.
-- Clamp the drive unit with the engine-side -1- into a commercially available vise -A-.
-- Separate the spring wire in the pressure spring -2- far enough in the direction of the arrow using a commercially available angle grinder until the pressure spring -2- is free of tension lengthwise.