Latch With Closing Assist, Removing And Installing: Removing
If the rear lid does not open, use the emergency release inside the rear lid trim panel to open it manually. Refer to the appropriate Service Information.
-- Remove the rear lid trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the anti-theft protection -5- -arrow b-.
-- Disconnect the connector on the latch.
-- Remove the hex nuts -4-.
-- Press the hook -6- together -d arrows- and remove the latch -1- from the rear lid -arrows c-.
-- Lock the locking catch -7- from the latch locking mechanism -4-.
-- Push the lever -6- all the way with the screwdriver -5- in the -direction of the arrow c- and hold.
-- Remove the release cable -1- from the retainer -arrow b-.
-- Guide the release cable -1- out of the lever -2- -arrow c-.