LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Gas-Filled Strut, Removing And Installing >> Uncovered Gas-Filled Strut, Removing And Installing, ARTEON >> Installing

Uncovered Gas-Filled Strut, Removing And Installing, ARTEON: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Rear Lid Gas Strut
GWWN55-10393Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Push the gas-filled strut ball sockets -1- onto the ball stud -4- until the ball sockets engage audibly on the ball stud.