LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Hood, Lids) >> 55 Hood, Lids >> Rear Lid >> Actuator, Removing And Installing >> Actuator, Removing And Installing, With Rearview Camera >> Removing

Actuator, Removing And Installing, With Rearview Camera: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear lid trim panel. Refer to REAR LID LOWER TRIM PANEL, REMOVING AND INSTALLING .

-- Disconnect the connectors -1 and 7-.

-- Remove the bolts -8-.

-- Rotate the actuator -2- slightly -a arrows- and remove it from the rear lid -arrow b-.

-- Remove the water drain hose -6- from the actuator -arrow c-.

If there is an electrical malfunction, the rear lid can be opened using the latch emergency release. There is an opening in the rear lid trim panel to access the emergency release.

Refer to OVERVIEW - REARVIEW CAMERA SYSTEM for information and procedure instructions for the rearview camera -4- and gears -3-

scientia non olet · About LEMON Manuals