LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Hood, Lids) >> 55 Hood, Lids >> Hood >> Striker, Removing And Installing >> Installing

Striker, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

New hex nuts must always be used if they are loosened.

The installation of the striker -1- is identical in reverse order of removal.

-- Adjust the striker. Refer to HOOD, ADJUSTING .

scientia non olet · About LEMON Manuals