Release Cable Coupling With Release Cables, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Engage the release cable on the mounting bracket -4- and clip in.
-- Lock the release cable coupling -1- in to the lock carrier -arrow c-.
-- Engage the release cables -2 and 3- on the latches and clip.
-- Guide the latches -5 and 8- into the lock carrier -e arrows-.
-- Install the new bolts.
-- Adjust the synchronous movement for the latches at the threads -9- -arrow f-.
-- A function test must be performed on the hood before it is closed.