Latch Release Lever, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Pull the release lever -1- and release the hood.
-- Insert a small screwdriver into the gap between the release lever -1- and the clip -2-.
-- Pry the clip -2- out of the release lever -1- -arrow b- and remove the release lever from the mounting bracket -3- -arrow a-.
For additional work on the mounting bracket -4-, remove A-pillar trim panel -3- at the bottom -4-. Refer to A-PILLAR TRIM PANEL, REMOVING AND INSTALLING .