Gas-Filled Strut, Venting

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Clamp the gas-filled strut in area x = 50 mm into the vise.

Fig 1: Clamping Area Of Gas Strut In Vise

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

CAUTION:

Risk of eye injury due to flying shavings.

Eye irritation and injury is possible.

- Wear protective eyewear.

-- Cover the saw cut section with a cloth.

-- Cut open the gas-filled strut cylinder within the first third of the total cylinder length from the edge on the piston rod side.

-- Dispose of the oil and cleaning cloths properly.