Dryer, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
If the dryer is replaced:
-- Pay attention to the procedure when replacing the refrigerant circuit components. Refer to COMPONENTS, REPLACING .
Continuation
-- Perform the "open the electric activated valves for the refrigerant circuit for extracting, evacuating and filling" with Vehicle Diagnostic Tester . Refer to Diagnostic Entries .
-- Refer to REFRIGERANT CIRCUIT, CHARGING .