Gas Cooler, Removing And Installing.: Removing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Immediately seal off any open lines and connections with clean plugs from the Engine Bung Set :VAS 6122 .
If the gas cooler is being replaced:
-- Pay attention to the procedure when replacing the refrigerant circuit components. Refer to COMPONENTS, REPLACING .
Continuation
-- Perform the "open the electric activated valves for the refrigerant circuit for extracting, evacuating and filling" with Vehicle Diagnostic Tester . Refer to Diagnostic Entries .
-- Refer to REFRIGERANT CIRCUIT, DISCHARGING .
-- Disconnect the refrigerant lines from the gas cooler. Refer to Refrigerant Lines for Gas Cooler, Disconnecting and Connecting .
-- Disassemble the radiator module. Refer to RADIATOR MODULE, DISASSEMBLING AND ASSEMBLING .