A/C Pressure/Temperature Sensor G395, Removing And Installing: Installing
WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Install the seals without oil.
-- Check the refrigerant lines for correct seating and tighten the A/C Pressure/Temperature Sensor -G395-, at the same time counterhold with the open end wrench.
-- Perform the "open the electric activated valves for the refrigerant circuit for extracting, evacuating and filling" with Vehicle Diagnostic Tester . Refer to Diagnostic Entries .
-- Refer to REFRIGERANT CIRCUIT, CHARGING .