Heater And A/C Unit Air Intake Housing, Removing And Installing: Removing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

There is a risk of fatal injury due to high voltage.

Electrocution by direct contact or electric arc can cause severe bodily injury or fatal injury.

- Have a high-voltage technician (HVT) or a high-voltage expert (HVE) de-energize the high-voltage system.

-- Refer to [For engine(s) EBRA] High-Voltage System, De-Energizing .

-- Remove the brace. Refer to IMPACT MEMBER, REMOVING AND INSTALLING .

-- Remove the fresh air intake. Refer to Fresh Air Intake, Removing and Installing .

-- Release the hook -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the cover -2-.

-- Remove the cover -1- from the guide.

AWD vehicles

-- Disengage the transmission ventilation hose.

Continuation for all vehicles

-- Disconnect the connectors -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Detach the clamps -2-.

-- Remove the fasteners -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the adapter plate -2-.

-- Remove the nuts -2- from the heater and A/C unit air intake housing -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the nuts -2- from the heater and A/C unit air intake housing -1-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the heater and A/C unit air intake housing -1-.