Air Shroud, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

CAUTION:

Water ingress to the heater and A/C unit and the vehicle interior due to damaged lines.

- Make sure the seals are installed correctly.

- Check the seals for damage.

-- Check the seal -9- for damage.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Tighten the nuts in tightening sequence -1- through -7-.

-- Tighten the bolts in tightening sequence -1- through -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Guide the high-voltage cable -7- through the opening of the air shroud -4-, mind the correct routing.

-- Clip in the retainers -6- of the grommet -5-.