Heating Element (PTC) 3 -Z132-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2022 Volkswagen ID.4 and 2021 Volkswagen ID.4. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

Conditions

The contact surfaces must be clean.

-- Clean dirty attachment points for the potential equalization cable. Refer to the appropriate service information .

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Connect the potential equalization cable -2- and tighten the nut -3-.

-- Attach the connectors -4- and -6-.

Fill the cooling system using the Cooling System Service Machine - TEXA :VAS 531 011 .

-- Refer to COOLING SYSTEM, FILLING .

Fill the cooling system using the Cooling System Charge Kit :VAS 6096 .

-- Refer to COOLING SYSTEM, FILLING .

Continuation for all vehicles

CAUTION:

There is a risk of fatal injury due to high voltage.

Electrocution by direct contact or electric arc can cause severe bodily injury or fatal injury.

- Have a high-voltage technician or a high-voltage expert bring the high-voltage system back into service.

-- Refer to [For engine(s) EBRA] High-Voltage System, Re-Energizing .