Vibration Damper, Removing And Installing: Notes
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Adapter:T40314
- Counterhold - Vibration Damper:T10355A
- Vibration Damper Assembly Tool:T10531
- Wrench - 21mm:T40263
The bolt -A- connects the vibration damper -1-, the timing chain sprocket -2- and the crankshaft -3-.
Requirement
- If the bolt -A- is being removed, then the timing chain sprocket -2- must be secured to the crankshaft -3-.