Sub-Assembly Bracket, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
-- Insert the connecting piece -2- in the Engine Temperature Control Adjusting Element -N493- -3-.
-- Push the engine oil cooler -1- with the sub-assembly bracket on the connecting pieces -2- and tighten the bolts.
-- Engine Oil, Filling. Refer to ENGINE OIL, FILLING .
-- Refer to Cooling System, Filling .