Ribbed Belt, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to OVERVIEW - NOISE INSULATION .
-- Remove the right front wheel housing liner. Refer to FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Mark the running direction of the ribbed belt with chalk or a felt-tip pen for reinstallation.
-- Tension the ribbed belt tensioner -1- in direction of -arrow- and insert the Locking Pin:T10060A -A-.
-- Remove the ribbed belt -3-.