Crankshaft Needle Bearing, Replacing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Requirement
- The front edges of the internal puller must not be broken off.
-- Position the Internal Puller:VAS 251 635 -A- behind the needle cage -upper arrow-.
-- Remove the needle bearing -1- using the Internal Puller:VAS 251 635 -A- and Counter Support:VAS 251 621 -B- from the crankshaft -2- in direction of -arrow-.