Balance Shaft, Removing And Installing, Exhaust Side: Installing

Install in the reverse order of removal while noting the following:

-- Push on the exhaust side balance shaft pipe, at the same time pay attention to the installation position.

Fig 1: Balance Shaft Pipe Installation Position

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Requirement

• The guide -arrow A- must engage in the cut-out -arrow B-.

Requirement

• The needle bearing rim is colored. If the needle bearing rim must be replaced, a needle bearing rim of the same color must be installed.

-- Firmly press together the needle bearing rim until it locks.

-- Check if all rollers are correctly installed in the bearing cage.

-- Coat the needle bearing and bearing track -arrows- from the exhaust side balance shaft with engine oil.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Turn the exhaust side balance shaft in the installation position.

Requirement

• The semi-round ring bearing contact surface must point upward.