Rotary Light Switch -EX1-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Switch off the ignition and all electrical equipment.
-- Place the ignition key and other drive authorization systems outside of the vehicle interior, to avoid an unintentional start of the vehicle.
-- Unclip the Rotary Light Switch -EX1- -1- using the Removal Wedge Set:VAS895015 in direction of the -arrow- from the instrument panel -2-.
-- Disconnect the connector.
-- Remove the Rotary Light Switch -EX1- -1-.