Glove Compartment Lamp Switch -E26-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Open the glove compartment lid -2-.
-- Release the stops -1- for the glove compartment lid -2- in direction of the -arrow A-.
-- Further open the glove compartment lid -2- in direction of the -arrow B-, while doing so, carefully remove the braking element shaft from the damping element.
-- Disconnect the connector -2-.
-- Turn the damping element -1- with Glove Compartment Lamp Switch -E26- -3- by 90° in direction of the -arrow-.
-- Remove the damping element -1- with the Glove Compartment Lamp Switch -E26- -3-.