Left Daytime Running Lamp and Position Lamp LED Module -L176- /Right Daytime Running Lamp and Position Lamp LED Module -L177-, REMOVING AND INSTALLING: Notes

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Special tools and workshop equipment required

Torque Screwdriver:VAG1624

Fig 1: Identifying Torque Screwdriver VAG1624
Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Electro-Static Discharge Work Surface:VAS6613

CAUTION:

Risk of destroying the / from electrostatic discharge from the body.

- Only perform procedures on the Left Headlight Range Control Adjustment Motor -V48- /Right Headlamp Range Control Adjustment Motor -V49- on an electro-static discharge work surface.

Structure of the Electro-Static Discharge Work SurfaceVAS6613

Fig 2: ESD Work Surface

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

- Cable with Alligator Clamp

- Potential Equalization Cable

- Protection Mat

- Wrist Strap

NOTE:

The following information describes the removing and installing on the left side of the vehicle as an example.