Washer Fluid Reservoir, Removing And Installing, Washer Fluid Reservoir In Front Left Wheel Housing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Remove the left headlamp. Refer to HEADLAMP, REMOVING AND INSTALLING .

-- Place the commercially available collecting device under the washer fluid reservoir.

-- Release the locking tab -3-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the filler neck -1- upward from the lock carrier holder -2-.

CAUTION:

There is a risk of leaks.

- A washer fluid reservoir, filler tube and filler neck are not designed to be separated.

-- Disconnect the connectors -5-.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Release and disconnect the washer fluid hoses -4-.

-- Remove the bracket -2- for the wiring harnesses of the washer fluid reservoir -1-.

-- Remove the nuts -3-.

-- Remove the washer fluid reservoir -1-.