Tie Rod, Removing And Installing: Removing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Loosen the wheel bolts.

-- Raise the vehicle.

-- Remove the wheel.

-- Remove the bolts -arrows- for the stabilizer bar -1-

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Loosen the nut -1- and the bolt -3- several turns.

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

-- Remove the bolt -3-.

-- Remove the nut -1- and then remove the bolt -4- to the rear. At the same time press the stabilizer bar upward.

-- Remove the tie rod -2-.