Left And Right Front Body Acceleration Sensor -G341- / -G342-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the seal from the entire length of the plenum chamber cover.
-- Remove the clips.
-- Lift the plenum chamber cover -1- to maximum 60 mm.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
a -
60 mm
-- Disconnect the connector -1-.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
-- Remove the bolt -2-.
-- Remove the Front Body Acceleration Sensor --.