Tightening Specifications
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
- Refer to OVERVIEW - SUBFRAME
- Refer to OVERVIEW - STEERING GEAR
- Wheel Bolts. Refer to WHEEL BOLTS TIGHTENING SPECIFICATION .
- Pendulum support bolts. Refer to OVERVIEW - ASSEMBLY MOUNTS .
- Noise insulation bolts. Refer to OVERVIEW - NOISE INSULATION .
- Exhaust system to subframe. Refer to OVERVIEW - MUFFLER, PASSAT, ARTEON .
If the steering wheel is still crooked after using the Locating Pins:T10486/1 then an axle alignment is necessary. In this case record it in the vehicles axle alignment log.