Run-Flat Tire, Retrofitting/Conditions For Use Of Run-Flat Tires

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Using run-flat tires on vehicles is permitted only if the run-flat tire is supplied with the vehicle either as standard equipment or as an option.

Because pressure loss in a run-flat tire is not always visible, these tires should only be used on vehicles equipped with a tire pressure monitoring system. This system warns the driver when the tire pressure falls below a certain value.

The following are permitted:

Direct measuring systems. Refer to Tire Pressure Monitoring System .

Indirect measuring systems. Refer to Tire Pressure Monitoring System .

Only mount run-flat tires on disc wheels with an extended double hump (extended hump - EH2). Refer to IDENTIFICATION .

Follow the assembly instructions. Refer to TIRES, MOUNTING .

Do not install both run-flat tires and standard tires, even if the two tires on each axle will be the same.

A standard tire can only be installed in exception cases for a short time or a limited driving distance. The specific characteristics designed for driving with a flat tire will not be available. The driver must be informed of this.

Always pay attention to the recommended tire brand. Refer to Wheels, Tires, Wheel Alignment .