LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 147 (Controls, Housing) >> 34 Controls, Housing >> Transmission, Removing And Installing >> Transmission Tightening Specifications >> Transmission Support To Engine And Bevel Box

Transmission Support To Engine And Bevel Box

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Component location and tightening sequence:

Gasoline engine

Fig 1: Transmission Support to Engine and Bevel Box
GWWN34-12589Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
Item Bolt
1 M10 x 45
2 M10 x 21
Sequence Bolts Tightening Specification
1. -1- and -2- Counter turn by hand
2. -2- tighten 40 Nm
3. -1- tighten 40 Nm

Driveshaft heat shield

Fig 2: Driveshaft Heat Shield
GWWN39-10761Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.