LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 145 (Seat Upholstery, Covers) >> 74 Seat Upholstery, Covers >> Rear Seat Covers And Cushions >> Seat Heating Element, Removing And Installing >> Installing

Seat Heating Element, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

-- Align the new heating elements on the seat cushion.

-- Peel the protective film off the heating element one after the other. Be careful not to damage the heating element.

-- Bond the heating element in the sequence -2-, -1- so that it aligns with the old heating element and is wrinkle free.

-- Route the connecting wire to the heating element along the bottom of the gaps.

Further installation is performed in reverse order of the removal.

scientia non olet · About LEMON Manuals