Rear Seat Backrest Cover And Cushion, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.
|
Install in the reverse order of removal while noting the following:
-- Fold the molding strip -1- 90° inward -arrow A-.
-- Engage the molding strips at the sides into the grooves on the backrest frame -arrow B-.
-- Engage the frame on the backrest frame in the headrest area.