Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing: Installing
WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
-- Guide the wire -3- through the cable guide.
-- Align the new heating elements on the backrest cushion while not pulling off the protective film.
-- Remove the protective films from the heating elements in succession, taking care not to damage the heating elements.
-- Glue the heating elements so that they align with the old heating elements and are free of wrinkles.
-- Route the connections to the individual heating elements in the base of the gaps.