LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 144 (Seat Frames) >> 72 Seat Frames >> Front Seats >> Lumbar Support Adjusting Mechanism, Removing And Installing >> Installing

Lumbar Support Adjusting Mechanism, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal while noting the following:

-- Make sure the splines on the lumbar support adjusting lever -1- align with the splines on the shaft -2-.

-- Check the lever for secure fit by pulling on it.

-- If the adjusting lever sits too loosely after assembly, then the adjusting lever must be replaced.

scientia non olet · About LEMON Manuals