LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2023 >> ID.4 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Interior Equipment) >> 68 Interior Equipment >> Extra Equipment >> Roof Grab Handle, Removing And Installing >> Roof Grab Handle, Removing And Installing >> Installing

Roof Grab Handle, Removing And Installing: Installing

WARNING: This page is about a different car, the 2023 Volkswagen Arteon. However, it is still accessible from the selected car via links, so may be relevant.

A spacer is installed under the roof grab handle, between the headliner and the bracket. Before installing, check the installation position of the spacer and correct it if necessary. Removing the spacer is not permitted.

NOTE:

Before installing, check all fasteners for damage and replace them if necessary.

Install in the reverse order of removal while noting the following:

-- Make sure both clips are completely engaged in the roof grab handle bracket.

scientia non olet · About LEMON Manuals